The DLX3049PTJ Twin 18v 5.0Ah powertool kit from Makita features the DHR264 SDS plus rotary hammer and DHS710 185mm circular saw from the Twin 18v (36v)lithium-ion range plus the DTD152 18v cordless impact driver. The twin 18v tools are powered by two 18V Li-ion batteries in series.Two 18V Li-ion batteries can be directly installed on the machine to power the 36v DC motor. Please note twin 18v machines must have two 18v batteries connected and with charge before they will operate. The DLX3049PTJ is supplied with DC18RD Twin port charger, 4 x BL1850 18v Li-ion Battery Packs in2 x MakPac TYPE 4 and 1 x MakPac TYPE 3 connector cases.

DHR264ZJ Features and Benefits:

• Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system.
• Compact design that maintains the same easy handling and high manoeuvrability as the BHR262.
• LED Job light with pre-glow and afterglow functions
• 3 mode operation • Rotation + Hammering • Hammering only • Rotation only
• When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty.
• With Quick Change Chuck
• Ergonomic soft grip.
• Battery capacity warning lamp.
• 40 different bit-angle settings.

Technical Specification:

Voltage - x2 18v
Max in concrete - 26 mm
Max. in steel - 13mm
Max. in wood - 32mm
Impacts per Minute - 0-4800ipm
No Load Speed - 0-1,200rpm
Vibration K factor - 1.5m/sec²
Vibration: Hammer Drilling - 15.5m/sec²
Vibration: Chiselling - 14 m/sec²
Vibration: Drilling into metal - 5m/sec²
Net weight - 4.7 kg

DHS710ZJ Features and Benefits:

• Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system.
• Compact and lightweight design.
• Rear dust exhaust port
• Same depth of cut as HS7100.
• Durable but lightweight magnesium die-cast blade case and safety cover.
• Blower function to clear wood dust from cutting line.

Technical Specification:

Voltage - x2 18v
Blade Diameter - 190mm
Max Cut @ 0º - 66mm
Max Cut @ 45º - 49mm
Max Cut @ 50º - 44mm
Bore (B) - 20mm
No Load Speed - 4600rpm
Vibration K factor - 1.5m/sec²
Vibration: Cutting Wood - 2.5m/sec²
Net weight - 4.7 kg

DTD152Z Features and Benefits:

• Electric brake
• Variable speed control by trigger
• Forward/reverse rotation
• Twin LED job light
• Ergonomic soft grip.
• Compact and lightweight design
• Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current.
• High rotation speed
• One-touch bit installation

Technical Specification:

Voltage - 18v
Driving Shank - 6.35mm (1/4\") Hex 
Machine Screw - M4-M8 
Impacts per Minute - 0 – 3,500 ipm
Standard Bolt - M5-M16 
High Tensile Bolt - M5-M12 
Coarse thread (length) - 22 - 125 mm
Noise sound pressure - 93 dB(A)
Noise sound power - 104 dB(A)
Noise K factor - 3 dB(A)
No Load Speed - 0 - 2900 rpm
Max Fastening Torque - 165 Nm
Vibration: Fastening Bolt - 10.5 m/sec²
Vibration K factor - 1.5 m/sec²
Net weight - 1.5 kg

Supplied With:

196934-4 - Twin port charger
821551-8 - Makpac connector case (TYPE 3)
DHR264ZJ - TWIN 18V Rotary hammer SDS+ LXT
DHS710ZJ - Twin 18V Circular saw 185mm LXT
DTD152Z - 18v LXT Impact Driver
821552-6 - Makpac connector case (TYPE 4) (2x)
196673-6 - Battery BL1850 18v Li-ion (4x)