DHP486Z:

Chuck Capacity: 1.5 - 13 mm

No Load Speed (Hi): 0 - 2,100 rpm

No Load Speed (Lo): 0 - 550 rpm

Blows per Minute (Hi) ipm: - 0 - 31,500 ipm

Blows per Minute (Lo) ipm: - 0 - 8,250 ipm

Voltage: 18 v

Max. in wood: 76 mm

Max. in masonry: 16 mm

Max. in steel: 13 mm

Torque Settings: 21 + Drill

Battery Type: Lithium-ion

Vibration K factor: 1.5 m/sec²

Noise sound pressure: 84 dB(A)

Noise sound power: 95 dB(A)

Noise K factor: 3 dB(A)

Body only machine: Net weight: 2.3 – 2.7 kg

Max. Fastening Torque (Soft Joint): 65 Nm

Max. Fastening Torque (Hard Joint): 130 Nm

Vibration: Impact drilling into concrete: 8.0 m/sec²

Vibration: Drilling into metal: 2.5 m/sec²

DTD154Z:

Voltage: 18 v

Standard Bolt: M5-M16

High Tensile Bolt: M5-M14

Coarse thread (length): 22 - 125 mm

Max Fastening Torque: 175 Nm

Battery Type: Lithium-ion

Vibration: Fastening Bolt: 12.5 m/sec²

Vibration K factor: 1.5 m/sec²

Noise sound pressure: 96 dB(A)

Noise sound power: 107 dB(A)

Noise K factor: 3 dB(A)

Body only machine: Net weight: 1.2 - 1.5 kg

Impact Selection: 3 stages + Tek mode

Driving Shank: 6.35mm (1/4") Hex

Blows per Minute (Hi) - ipm: 0 - 3800 ipm

Blows per Minute (Med) - ipm: 0 - 2600 ipm

Blows per Minute (Lo) - ipm: 0 - 1100 ipm

Machine Screw: M4-M8

No Load Speed (hard/med/soft): 0-3600 / 2100 / 1100 rpm

Kit Includes:

DHP486 Combi Drill

DTD154 Impact Driver

2 x 5ah Batteries

Charger

Case