The DeWalt DCK276P2 is a kit featuring a DCD996 XR Brushless Combi Drill, a DCF887 XR Brushless Impact Driver and a DCB115 XR Universal Charger.

18 Volt DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings.

Technical Specification:

Chuck: 13mm Keyless
No Load Speed: 0-450/0-1,300/0-2,000/min
Impact Rate: 0-8,600/0-25,500/0-38,250/bpm
Max Torque: 95Nm, 11 Settings
Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mm
Weight: 2.1kg

18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Technical Specification:

Bit Holder: 6.35mm (1/4in)
No Load Speed: 0-850/0-2,100/0-3,000/min
Impact Rate: 0-1,800/0-2,900/0-3,700/bpm
Max Torque: 26/80/203Nm
Weight: 1.56kg

Multi-Voltage DCB115 XR Universal Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

Supplied With:

1 x DeWalt DCK276P2 18v 2 x 5.0Ah Li-Ion Brushless Twin Pack
1 x 18 Volt DCD996 XR Brushless Combi Drill
1 x 18 Volt DCF887 XR Brushless Impact Driver
1 x Multi-Voltage DCB115 XR Universal Charger
2 x 18 Volt 5.0Ah Li-Ion Batteries
1 x TOUGHSYSTEM™ DS150 Toolbox